Bside Bth02 Waterproof Two Channel Temperature Humidity Dew Point Data Logger With USB Interface Data Logger Recorder

Features:
Can name each channel and enable/disable specified channel freely LED alarm enable/disable, LED alarm hold enable/ disable and alarm limit settings for all channels via DGraphTM
Can input formula to customize compound graph from selected logging data
Can create and customize new unit easily and freely for all measurement parameters
Logging status indication via red/green LED and battery status indication via yellow LED
Start logging method: Immediately, Button, Delayed
Can input two point calibration value for each channel when setup
Dew point calculated via software DGraphTM
LCD: Memory Capacity 64KBytes(Total 32,000 readings for all channels)
Sample Rate: Can be selected from 10 seconds to 12 hours
Stop Method: Stop when memory full, overwrite when memory full, stop by button, and stop until specified number of sample points finished
Sample Mode: Instant(default), average, maximum and minimum
This will decide how to dispose data at idle time between a sample interval
Button: Software config to start logging bybutton, or clear and reset LED alarm when LED alarm is hold
LED: Red&green LED: Logger Status indication(Include Delay to Start, Logging, Alarm, Finished) (Sofware can disable this two LED for saving power)
Yellow LED: Low battery indication
Alarm: User programmable high or low alarm limit for each channel(If necessary)
LED alarm and hold
PC Software: DGraphTM software and USB driver required (Included on CD)
(Compatible with Windows XP, Windows Vista, Windows 7&8(32 bit & 64bit Versions)
Use the software to setup, download, view graph and analyse data
Power Supply: Replaceable 1/2AA 3.6V 1200mAh Lithium Battery(Included)
NOTE: USB interface can supply power directly if necessary
Specifications:
Temperature measurement range: -35~80°C(-31~176°F)
Accuracy: ±0.3°C(±0.5°F)
Resolution: 0.1°C / 0.2°F
Humidity range/accuracy/resolution: 0-100%RH / ±3%RH / 0.1%RH typically
Operating Range: 0 to 100%RH  -35 to 80°C(-31 to 176°F)
Case Material: ABS, TPU, PC
Package size: 17 * 11 * 5cm / 6.8 * 4.4 * 2.0 in
Package weight: 155g / 5.5 oz
Package List:
1 *  BSIDE BTH02 Portable USB Temperature Data Logger Recorder
1 *  CD
1 *  Screws Part
1 *  User Manual
1 * 1/2AA 3.6V 1200mAh Lithium Battery